Self-test 20 Amp GFCI Outlet with TR WR

3Grace Trimone is the first GFCI supplier in China, who successfully makes the Gfci Outlet cannot be reset if the circuit no longer provides ground fault protection. In addition, 3Grace GFCI series products have a built-in line-load reversal feature that prevents the GFCI from resetting if the installer mistakenly reverses the load and line connections.

Product Specification

GFCI Features:

1. Providing Self-Testing Function - a automatic self-test is designed, it will be conducted every 1-10 minutes to ensure it can respond to a ground fault.

2. Providing End-of-Life Monitoring - The red indicator will turn on immediately if GFCI Outlet displays alarm during operation, it is to remind the end user the GFCI receptacle have reached it’s end-of-life and must be replaced with a new one.

3. With Tamper Resistant - 20 amp GFCI outlet providing with a safe lock function to keep children from electrocution when using any foreign body to contact the alive parts of the GFCI outlet.

4. With Weather Resistant -WR Gfci Receptacle Outlet 20amp is good for humid & outdoor areas such as bathroom, kitchen, balcony etc.

5. With UL certificate - meets and exceeds UL943 standard

Product Application:

The Ground Fault Circuit Interrupter normally is installed in any potentially wet or damp places such as kitchens, bathrooms, laundry rooms, outdoors, basements, garages and workshops. Wet places can make the possibility to dangerous electric shock higher but applying a GFCI Receptacle Outlet can greatly reduce your risk of injury.

FAQ:

Question: Why perform the Self-test?

Answer: Dear Customer, If you mis-wire a GFCI outlet, it can not be reset, the green indicator LED will be on, by which it may prevent personal injury or death due to a ground fault (electrical shock). If you mistakenly connect the LINE wire to the LOAD terminals, it will not provide power to either the GFCI outlet its self or the load terminal fed through the GFCI.

Question: If i am not sure about the amps of my circuit (15a vs 20a), is it safer to just use with the 15Amp outlet?

Answer: it does not matter, it's ALWAYS OK to put a 15A outlet on a 20A circuit.

Question: If the upstream gfci is 15Amp, would the downstream gfci have to be in 15Amp?

Answer: If you already have an upstream GFCI and it is wired in a correct way, no need a downstream GFCI any more, as a well-wired GFCI protects all downstream circuits.

Packaging:

Below GFCI packaging for your reference

Customized packaging available

Quality Control

Product Quality is one of the most important factor both manufacturer and consumer consider about. Trimone have taken great importance to the quality control to make our products reliable. The TRWR GFCI receptacle 20amp provide with Tamper resistant and Whether resistant function, in spite of this, all GFCI outlet have been tested through the UL approved testing system to make sure every outgoing product with good quality.